Pole barns are found across the United States. While these iconic post-frame buildings are known for their durability, their exterior trims can fall victim to the relentless forces of nature and time.
Certain building repairs and renovations can take more time or money, but replacing damaged pole barn trim can be a simple fix.
Throughout this blog post, we'll explore everything from assessing the extent of damage and gathering the necessary materials to removing old trims, preparing for installation, and touching on important maintenance tips.
4 Steps When Repairing Damaged Pole Barn Trim
1) Assess the Damage
Pole barn damage can come in all shapes and sizes, though it’s never fun. The most common causes are exposure to harsh weather conditions, wear and tear over time, and accidental vehicle mishaps.
Before any repair, it’s important to assess and document the area.
Start by visually inspecting all the trims around the pole barn. Look for any signs of damage, such as rot, cracks, or splits. Pay close attention to areas where water may accumulate, such as near the roofline or ground level.
Damage to pole barn trims may lead to larger issues like roof leaks or improper drainage. Inspect the surrounding areas, including the roof, gutters, and foundation.
The trims’ overall condition and the structure’s age should be considered too. Trims that are old and weathered or have extensive damage may require more comprehensive repairs or replacement.
(Photographing the damage can help plan the repair process. It also serves as a reference point for monitoring progress and can be a helpful document for insurance purposes.)
2) Remove Damaged Trim
The damaged pieces must be safely removed before installing new trim. Tools like a hammer, pry bar, utility knife, and saw are often necessary for stubborn or heavily damaged sections.
Begin by locating the edges of the damaged trim. Use a pry bar between the trim and surface, such as siding or framing. Slowly and gently pry the trim away from the surface, being cautious not to damage surrounding materials.
If the trim is long or if there are multiple sections, work in manageable sections to avoid putting too much stress on the structure.
Remove any nails or fasteners securing it to the structure as the trim is removed.
After this is complete, inspect the surrounding areas for additional damage or issues that may need attention before installing the new trim.
Clean up any debris, nails, or fasteners left behind, ensuring a clean and smooth surface when installing the new trim.
3) Installation
When installing the new trim, ensure the space is properly prepared for a long-lasting repair.
As mentioned above, a clean and smooth surface is ideal for the installation. Removing dirt or debris will help the new trims adhere properly and ensure a neat finish.
Editor’s Note: Repair any issues, such as rotted wood or loose siding, before installing.
Before making any cuts, measure the length of the area where the new trims will be installed.
Once the correct length has been determined and the trim is cut, test fit it in the installation area to ensure it fits properly. Make any necessary adjustments before installing if the trim is too long or too short.
After all this, position and attach the trim to its correct spot. With the trim in position, use nails or screws to secure it to the substrate. Start by securing the trim at one end, then work along the length, adding fasteners at regular intervals.
Regarding cost, trim typically ranges from $.22/linear foot to $9.32/linear foot. Due to the wide variability of projects, a more accurate quote can be requested.
Additional suggestions for trim installation include:
- Before securing the trim, use a level to check for horizontal and vertical alignment. This ensures a professional-looking finish.
- Maintain consistent spacing between fasteners along the trim length to ensure even and secure attachment. This helps distribute the load evenly and prevents the trim from warping or buckling over time.
- Follow any manufacturer recommendations or building codes regarding spacing requirements for fasteners. Typically, nails or screws should be spaced at regular intervals, such as every 6 to 8 inches, depending on the size and type of trim.
4) Maintenance Tips
If you’ve had a repair or renovation done, you will most likely be relieved when your pole barn or home is back in tip-top shape.
No matter what, proper maintenance is essential for preserving the condition and longevity of your building.
Remember that dirt, debris, and buildup can accumulate over time when focusing on pole barn trims. It doesn't hurt to clean it periodically. They can be rinsed thoroughly with clean water.
Avoid moisture damage by ensuring that your pole barn is properly waterproofed (your gutters and downspouts should be directed away from the structure.)
In other instances, you’ll want to trim any vegetation growing near your pole barn, such as trees, shrubs, or vines. Overgrown vegetation can trap moisture against the trims and promote rot, mold, and insect infestations.
Stay proactive in maintaining your pole barn trims by staying informed about best practices for care and maintenance.
Regular maintenance helps prevent costly repairs and ensures that your pole barn remains a functional and attractive asset for years.
Are You Ready to Repair Your Damaged Pole Barn Trim?
Pole barn damage is unfortunate, but luckily, we’ll repair or renovate ANY post-frame building!
At FBi Buildings, our Repair & Renovation Specialists will help you navigate the building process to get the best bang for your buck.
Are you ready to get started on your pole barn repair now? Please call our office at (800) 552-2981, and we’ll gladly give you a FREE renovation quote.
Do you have more questions about pole barn trims that aren’t covered in this article? If you need help designing and planning, please contact FBi Buildings at 800.552.2981 or click here to email us. If you’re ready for a price, click here to request a quote, and a member of our Customer Engagement Team will help you determine the next steps.